Manual Handling Training Courses & Qualifications - Online Manual Handling Training Course - Moving and Handling Training Courses - 

Manual Handling Training Courses & Qualifications

Also referred to as Moving and Handling Training.

x

Manual Handling Training Courses & Qualifications

Manual handling at work: A brief guide - HSE

Manual handling at work A brief guide

Introduction This leaflet describes what you, as an employer, may need to do to protect your employees from the risk of injury through manual handling tasks in the workplace. It will also be useful to employees and their representatives. The Manual Handling Operations Regulations 1992, as amended in 2002 (‘the Regulations’) apply to a wide range of manual handling activities, including lifting, lowering, pushing, pulling or carrying. The load may be either animate, such as a person or an animal, or inanimate, such as a box or a trolley

What’s the problem? Incorrect manual handling is one of the most common causes of injury at work. It causes work-related musculoskeletal disorders (MSDs) which account for over a third of all workplace injuries. (For the latest statistics, visit the HSE web page, www.hse.gov.uk/statistics/causdis/musculoskeletal/index.htm.) Manual handling injuries can happen anywhere people are at work – on farms and building sites, in factories, offices, warehouses, hospitals, banks, laboratories, and while making deliveries. Heavy manual labour, awkward postures, manual materials handling, and previous or existing injury are all risk factors in developing MSDs. There is more information and advice on MSDs on the HSE website, including advice on managing back pain at work. Taking the action described here will help prevent these injuries and is likely to be cost effective. But you can’t prevent all MSDs, so it is still essential to encourage early reporting of symptoms. What should I do about it? Consider the risks from manual handling to the health and safety of your employees – this guidance will help you to do this. If there are risks, the Regulations apply.

Consult and involve the workforce. Your employees and their representatives know first hand what the risks in the workplace are. They can probably offer practical solutions to controlling them. The Regulations require employers to: ■ avoid the need for hazardous manual handling, so far as is reasonably practicable; ■ assess the risk of injury from any hazardous manual handling that can’t be avoided; and ■ reduce the risk of injury from hazardous manual handling, so far as is reasonably practicable.

These points are explained in detail under ‘Avoiding manual handling’ and ‘Assessing and reducing the risk of injury’. Employees have duties too. They should: ■ follow systems of work in place for their safety; ■ use equipment provided for their safety properly; ■ cooperate with their employer on health and safety matters; ■ inform their employer if they identify hazardous handling activities; ■ take care to make sure their activities do not put others at risk.

Manual Handling Training Course | Online Certification

Online Manual Handling Training Course

Also referred to as Moving and Handling Training.

The Manual Handling Operations Regulations 1992 require employers to ensure that all employees are trained and competent in manual handling.

Manual handling accidents account for more than a third of all accidents reported each year to the enforcing authorities. It is estimated that in excess of 500,000 people in Great Britain suffer from a musculoskeletal disorder (MSD) mainly affecting the upper limbs or neck that was caused, or made worse, by their current or past work.

This Manual Handling Training Course provides the necessary information and training for organisations to understand more about the risks associated with manual handling, how to undergo a risk assessment and how to ensure appropriate control measures are put in place.

Who Should Take This Manual Handling Training Course?

The manual handling course is aimed at all levels of employees who may undertake manual handling operations, including the transporting of a load of items by lifting, putting down, pushing, pulling, carrying or moving thereof by hand or by bodily force. This includes, but is not limited to, professions such as:

  • Warehouse and factory staff
  • Heavy manual labourers
  • Unloading and loading of vehicles
  • Construction and building site workers
  • Office workers
  • Delivery drivers
  • Farmhands

Do You Comply With The Manual Handling Operations Regulations 1992?

The Manual Handling Operations Regulations 1992 require employers to ensure that all employees are trained and competent in manual handling. It is the employer’s duty to avoid manual handling as far as is reasonably practicable and, if this cannot be done, the employer must take steps to reduce the risk of injury.

Section 2 of the Health and Safety at Work Act 1974 and regulations 10 and 13 of the Management of Health and Safety at Work Regulations 1999 require employers to provide their employees with health and safety information and training. This should be supplemented as necessary with more specific information and training on manual handling injury risks and prevention, as part of the steps to reduce risk required by the regulations.

This Manual Handling Training Course ensures employers comply with these Regulations by providing appropriate knowledge of the risks and safety measures associated with manual handling tasks.

Certification

On successful completion of the course you will be sent a quality assured certificate through the post the next working day. This can be used to provide evidence for compliance and audit.

All of our courses are accredited by the CPD Certification Service as conforming to universally accepted Continuous Professional Development (CPD) guidelines.

If you wish to try this course then register for a demo by clicking the 'interactive demo' button. You will be given the option to purchase and continue with your course at the end of your demo!

Content

The course is divided into five accessible, interactive modules and also includes an assessment at the end:

  • Introduction and Legislation – what is manual handling? Causes of injury, benefits of controlling risks, manual handling legislation, employer and employee duties and HSE guidance.
  • Identifying the Risks – types of injury, occupations most at risk, the musculoskeletal system, the mechanics of movement and factors that increase the risk of harm.
  • Risk Assessments – what is a risk assessment? Identifying task, load and environmental hazards, deciding who may be harmed, evaluating risks, recording findings and reviewing and updating.
  • Reducing and Controlling the Risks – preparing a manual handling operation, hierarchy of control measures, individual capacity, can manual handling be avoided? Reducing the risk of harm, mechanical aids, changing the task, load and environment, personal protective equipment and reducing the risks from team handling.
  • Manual Handling Techniques – lifting from low levels, carrying, lowering from height, pushing and pulling, team handling and further information.

Aims of the Manual Handling Training

By the end of this course learners will:

  • Be able to define manual handling and explain the common causes of injury.
  • Understand the legal responsibilities and the duties placed on employers and employees.
  • Be able to recognise manual handling hazards.
  • Understand the types of injury that can be caused by poor manual handling practice.
  • Be able to undertake an effective manual handling risk assessment.
  • Understand the control measures that can be put in place to reduce the risk of harm.
  • Understand and practise the best way to handle loads to maintain a safe working environment.

Assessment

The online assessment is taken on completion of the training material. You will be asked 15 multiple choice questions with a pass mark of 80%. The answers are marked automatically so that you’ll instantly know whether you passed. If you don't pass don't worry! You can take the test as many times as you need with no extra charge.

Manual Handling - Objects - RoSPA

Manual Handling Training Courses

In November 2015, Ofqual recognised RoSPA as an Awarding Organisation with the authority to award regulated qualifications.

RoSPA's awarding organisation is trading as 'RoSPA Qualifications' and operates separately from RoSPA Workplace Training, RoSPA Fleet Services (RFS), and other areas of RoSPA.

This course leads to a RoSPA Level 3 Award for Manual Handling Trainers / Safer People Handling Trainers.

RoSPA is one of the longest running providers of manual handling training courses in the UK, and offers crucial health and safety training for all organisations. Manual handling is one of the most common causes of injury at work and causes over a third of all workplace injuries which include work related Musculoskeletal Disorders (MSDs) such as upper and lower limb pain/disorders, joint and repetitive strain injuries. RoSPA has developed courses which offer both practical skills and relevant theory.

Choose from the following Manual Handling Training courses

Level 3 Manual Handling Trainers - This manual handling trainers course will help minimise the incidence of MSDs in your organisation and will provide delegates with the knowledge and skills to deliver bespoke, effective manual handling training within your organisation.

Level 3 Manual Handling Trainers Requalification - The course will provide learners with an update on legislative changes and practices that impact on managing manual handling risks and training.

Manual Handling Risk Assessment - Provides delegates with all they need to know about manual handling risk assessments from the positive benefits, the use of the TILEO mnemonic, to the appreciation of the stresses applied during handling operations.

Manual Handling & Postural Awareness - This course is only available in-company and will provide your workforce with basic manual handling training, which will outline the hazards/risks and measures to reduce the risks within your organisation.

You can also view our full range of courses and training solutions by looking at our new catalogue.

Online Manual Handling Training Course | iHasco

Manual Handling Training V2

This online Manual Handling training teaches you all you need to know about safe Moving and Handling, including lifting techniques, LITE, and why Manual Handling training is so important to your everyday health - more specifically, comprehensive guidance on how to maintain a healthy back. To date, we've had over 260,000 people take our Manual Handling Training!

Being competent in safe carrying and lifting techniques for the workplace is a legal requirement, and this course provides everything you need to know.

This course looks at safe moving and handling, the 'LITE' technique (Load. Individual. Task. Environment.), and explains why safe workplace lifting is so important to your everyday health. 

Poor manual carrying is responsible for more than a third of all workplace accidents reported to the authorities each year. Ensuring good practice helps to reduce on-location accidents and staff absence as a result of an injury.

Manual Handling Training isn't only for warehouse use either - it is just as important in everyday situations. Moving objects safely is a hugely important requirement of modern working life, and this training course can actually show you how to move even the heaviest of objects in a safe manner. 

Maintaining a healthy back is also vital in enabling you to meet the demands of your everyday responsibilities – at work, at home, and during your leisure time. This training equips you with all the tools you need to protect your back whilst conducting a wide variety of Manual Handling tasks.

Not quite what you were looking for? Did you mean Manual Handling including tyres or Moving and Handling People?

Key Features & Benefits of this Course

  • Suitable for all employees, including staff and managers
  • Helps you to meet the requirements of the Manual Handling Operations Regulations (1992)
  • Can be fully completed in just 35 minutes!
  • Features a free online trial period, with bulk discounts available
  • CPD accredited
  • Independently approved by IOSH
  • Free trial, demo and bulk discounts available
  • Contact us to find out more about condensed versions and different languages
  • Improved graphics and animations
  • Additional resources feature!

Manual Handling Training V2 Course Contents

Your back during Manual Handling

The introduction to our course covers your back – what it’s made up of, how it works, how flexible and strong it is, but also how fragile it can be if it’s not look after. It explains what damage can be done with poor lifting techniques, and it offers an interesting insight into why children naturally lift objects correctly

Daily Tasks

The second section of our Manual Handling Training explains how you can prevent aches, pains and more serious damage by maintaining a healthy back on a daily basis. It covers correct (neutral) postures, working in the Power Zone, and how to successfully break bad postural habits.

LITE Assessment

Before you begin any Manual Handling task, you need to complete a LITE assessment to reduce the risk of injury. This section takes you through the four different stages (Load Individual Task Environment) and provides you with additional advice about what to do during these tasks

Techniques

Our fourth and final section provides step-by- step demonstrations on how to carry out various types of lift – from the floor, waist height, and head height; it takes you through a two-stage lift, team lift, and loading a trolley too. This section also covers the three Golden Rules of Manual Handling.

Manual Handling Certificate

This Online Manual Handling training programme ends with a 20 question multiple choice test with a printable certificate. 

As well as printable user certificates, training progress and results are all stored centrally in your LMS (Learning Management System) and can be accessed any time. From there, you can re-print certificates; check and set pass marks and use the system as proof of commitment to ongoing legal compliance. 

What does my certificate include?

Your Manual Handling Certificate includes your name, company name (if applicable), name of course taken, pass percentage, date of completion, expiry date and all relevant approvals.

Legislations relating to Manual Handling

The Manual Handling Operations Regulations 1992

Under The Manual Handling Operations Regulations 1992 Manual Handling is taken to include the lifting, lowering, pushing, pulling, carrying and movement of anything by hand or bodily force. The Management of Health & Safety at Work Regulations 1999 (13(2)) also require that every employer must ensure that their employees are provided with adequate health and safety training. 

Council Directive 90/269/EEC of 29th May 1990 on the minimum health and safety requirements for the manual handling of loads where there is a risk particularly of back injury to workers

"Employers must ensure that workers receive proper training and information on how to handle loads correctly, and the risks they might be open to - particularly if these tasks are not performed correctly"

Council Directive 90/269/EEC, Article 6, Section 2

The HSE suggests that, in general, manual handling training should be suitable for the individual, tasks and environment involved. It is important that these courses offer a range of different pieces of advice, including:

  • Manual handling risk factors and how injuries can occur;
  • How to carry out safe manual handling, including good handling technique;
  • Appropriate systems of work for the individual's task and environment;
  • Use of mechanical aids;

It is important to emphasise that the training contained in this programme is invaluable not only in the workplace itself but for general everyday use outside the workplace too. After all, if a member of staff injures their back no matter where they are they may need time off work and it may affect their general fitness in the short or long term.​

Who is our Manual Handling Training for?

Our Manual Handling training is for all levels of staff that undertake manual handling operations. Construction and building site workers will undertake more manual handling operations than most due to transporting loads by lifting, pushing, carrying, pulling or putting down.

What are the consequences of poor manual handling?

If manual handling is not carried out properly it can have significant consequences on your health, particularly if you carry out manual handling operations regularly.

Poor manual handling can result in musculoskeletal disorders, symptoms of which include:

  • Pains that can either be localised or widespread
  • Dull aches
  • Restricted movement
  • Swelling
  • Stiffness
  • Fatigue
  • Twitching or burning sensations in muscles

The most common places for musculoskeletal disorders to occur are in the neck and in the upper / lower back.

As a result of musculoskeletal disorders, people can also experience bouts of depression and other mental health issues.

Manual Handling Training Course —The Health & Safety Group

Manual Handling Training Course | Virtual College

Manual Handling in the Workplace Training Course

Employers are required by law to take reasonable steps to safeguard the health and safety of all employees, one of which is increasing awareness about the hazards related to manual handling, and outlining what can be done to minimise risk.

This course is primarily aimed at anyone who may need to lift items as part of their duties, however the information is applicable to any workplace environment.

  • Online, self-paced training
  • Interactive course with colourful animations
  • Complete in one to two hours
  • 24 hour learner support
  • Instant digital certificate on completion
  • CPD certified

This online Manual Handling training course provides learners with the knowledge they need in order to reduce the chance of incurring an injury whilst manually handling loads at work.

Why take this manual handling training course?

Back injury is the main reason for absence from the workplace and one third of all reported injuries that result in three days off work are caused by manual handling accidents. By increasing the awareness about hazards related to manual handling, staff can ensure that they are able to manually handle workplace loads correctly and safely.

Upon completion of this course, learners will understand the importance of moving and handling objects correctly. They will understand how the spine works and how to avoid common spinal injuries. They will be able to identify the important things to take into account before undertaking the moving or lifting of a load. They will also understand the legislation that applies to manual handling, and the responsibilities of an employee and of an employer.

E-learning content

  • Introduction
  • The Law
  • The Spine
  • Moving and Handling Objects Safely
  • Summary

Training outcomes

  • Understand the reasons why you need to know how to move and handle objects correctly
  • Know the key pieces of legislation that relate to manual handling
  • Understand the responsibilities of employees and employers
  • Know the basic theory of how the spine works, common injuries and how to avoid them

Target audience

This is a manual handling course that is primarily applicable to anyone who may need to lift items as part of their duties, however the information is applicable to any workplace environment.

Accreditation

The content of this course has been independently certified as conforming to universally accepted Continuous Professional Development (CPD) guidelines.

Duration

On average this course takes two hours to complete. The length of time taken depends entirely on how individuals study and absorb the material. You can proceed as quickly or slowly as you like.

Entry Requirements

There are no specific entry requirements for this manual handling training course.

Test and certificate

The end of course test consists of 15 multiple choice questions. Learners are required to achieve a 85% pass mark, and, if necessary, may attempt the test three times at no extra cost.

If learners do not achieve the 85% pass mark, further attempts may be given by contacting our support team.

Learners will be able to download a digital certificate on completion. This can be printed, and we suggest you keep it for your records.

Manual Handling for Assessors - HSL

Manual Handling for Assessors

HSL is to run a 1 day course on Manual Handling for Assessors.

Please email your expression of interest

Introduction

Manual handling is one of the main causes of musculoskeletal disorders (MSD), which are the second most common occupational injuries within the UK and make up nearly half of all work-related ill health seen by general practitioners (GPs) are MSD related. The most recent HSE statistics on MSDs show a 20% increase in MSDs with 184,000 new cases (2013/14), around 80 per cent of which are attributable to work conditions.

Prevention and control of work-related musculoskeletal disorders (MSD) is a major priority and as such HSE have published a simple but effective risk assessment method called the MAC tool.  This enables risk identification of key manual handling risk factors so that these can be eliminated or managed in the most cost effective way.

This course will equip you with the knowledge to help recognise, assess and reduce manual handling risks in your organisation. It is suited to employers and employee representatives who intend to begin the process of manual handling risk assessment and control within their companies. It will also benefit those already involved in manual handling risk reduction who require more formal or in-depth training in this subject, including training in the use of specific manual handling assessment tools.

The course will cover:

  • Principles of manual handling
  • Understanding injuries
  • Common types of injuries
  • Legal aspects
  • Key risk factors
  • Manual handling risk assessment (MAC and L23)
  • Pushing and pulling
  • Control and reduction of risk
  • Key principles of good handling techniques
  • Case studies

Presenters include:

• Matthew Birtles, HSL - Ergonomics specialist in MSDs

Venue

The course will be run at the HSL laboratory in the spa town of Buxton. Buxton is in the heart of the Peak District and has good links to mainline train stations and Manchester International Airport.

Details of hotels in the Buxton area can be found at www.visitbuxton.co.uk

Cost

The cost of this course is £495 per person (includes course notes, lunch and refreshments).

Please note the invoice option is not available within 4 weeks of the course date, or for overseas customers.  If you are selecting the invoice option for payment, it will be mandatory to input a purchase order/reference number as we are unable to process booking forms without this.

For further dates and additional information email: training@hsl.gsi.gov.uk or contact the Training & Conferences Unit
at HSL directly on +44 (0)203 028 3704.



Manual Handling Courses - Find and Compare - Findcourses.co.uk

Manual Handling Courses and Training

Training Courses in Manual Handling

Manual handling is the process of exerting force to pull, lift, push, move or carry an item. Within the contexts of the workplace, training in manual handling provides employees and managers with an increased awareness of the appropriate methods of handling and carrying heavy loads without risking injury.

If you work in an environment that requires knowledge in properly manual handling or if you employ people who you expect to do manual handling in the workplace, you need a manual handling course.

Read more about Training Courses in Manual Handling

Manual Handling Training Course | Principles & Practice AoFAQ

AoFAQ Principles and Practice of Manual Handling

The AoFAQ Level 2 Award in Principles and Practice of Manual Handling Training Course is aimed at those who carry out manual handling at work, providing essential information about manual handling hazards and their control.

The AOFAQ Level 2 Award in Principles and Practice of Manual Handling qualification is designed to provide learners with the knowledge and skills to safely move objects in the workplace.

This Manual Handling Training Course builds on the best practice guidance from the Health and Safety Executive and provides learners with the opportunity to practice safe moving principles.

The Health and Safety and Work Act 1974 and the Manual Handling Operation Regulations 1992 require each employer to provide adequate supervision and training and as well as undertake manual handling risk assessments.

This qualification will support employers to demonstrate their commitment to the legal obligations.  The qualification is ideal for new starters, existing staff and for refresher training.

Course Summary

  • Open Course Price: £95.00 + vat per person (£114.00 inc vat)
  • On Site Course Price: Call 0333 666 0555 for a competitive quotation
  • Delivery Method: Classroom
  • Instructor/Delegate Ratio: 1:12
  • Assessment: Multiple Choice Examination and Practical Observation assessment
  • Awarding Body: QCF
  • Duration: Usually 8:30am to 2:30pm
  • Prerequisite: None

Who Should Attend

Our AOFAQ Level 2 Award in Principles and Practice of Manual Handling qualification which is designed for anyone required to have the knowledge and skills to safely move objects in the workplace.

What Will You Get From This Manual Handling Training Course

The Health and Safety and Work Act 1974 and the Manual Handling Operation Regulations 1992 require each employer to provide adequate supervision and training and as well as undertake manual handling risk assessments. This qualification will support employers to demonstrate their commitment to the legal obligations and whilst it does not qualify learners to undertake manual handling risk assessments independently, it will provide them with the knowledge to assist the employer in completing the legal requirement of carrying out a workplace risk assessment.

Learning Outcomes:

1. Understand the reasons for safe manual handling

  • 1.1 Outline the potential injuries and ill health associated with incorrect manual handling
  • 1.2 Outline employers and employees duties relating to manual handling at work
  • 1.3 Outline the consequences for non-compliance with health and safety requirements at work

2. Understand how manual handling risk assessments contribute to improving health and safety

  • 2.1 Explain the terms ‘hazard’ and ‘risk’ in the context of manual handling work
  • 2.2 Outline the process for carrying out a manual handling risk assessment
  • 2.3 Describe the principle of the risk control hierarchy when applied to manual handling

3. Understand the principles, types of equipment and testing requirements associated with manual handling safety

  • 3.1 Describe safe movement principles associated with manual handling
  • 3.2 Outline the types of equipment designed to be used for manual handling tasks
  • 3.3 Outline the requirements for the testing, servicing and examination of manual handling and lifting equipment

4. Be able to apply safe manual handling principles

  • 4.1 Demonstrate efficient and safe manual handling principles when;
    • A. Applying effort to, or moving a load or object manually on their own
    • B. When using manual handling aids and equipment
    • C. When undertaking a manual handling task as part of a team

AOFAQ Level 2 Award in Principles and Practice of Manual Handling – Open Course

To reserve a place on our open course schedule for the AOFAQ Level 2 Award in Principles and Practice of Manual Handling course follow the links below for your preferred course date, or to speak to one of our training consultants please contact us on:

Manual Handling Training Course

Manual Handling

A course designed to minimise the risk of injury to individuals and others by increasing awareness of potential manual handling hazards in the workplace.

Course Details

Number of Delegates: Maximum 12

Duration: Half Day

Overview: To provide delegates with a thorough understanding of how to minimise the risk of injury to themselves and others by increasing awareness of potential manual handling hazards in the workplace and their outcomes.

Who should attend?

Anyone who has to carry out Manual Handling activities

Course content

Manual Handling Regulations

  • Management of Health & Safety at Work Regulations.
  • Accident statistics.
  • The functions of the spine and muscular system.
  • Typical injuries.
  • Hazard identification and assessment of:
    • The task
    • The load
    • The working environment
    • Individual capabilities
  • Correct handling techniques.
  • Practical exercises and tuition.

By the end of the course delegates will be able to:

  • Summarise the legislation and manual handling regulations that relate to lifting in the workplace.
  • Appreciate the financial impact on industry caused by injuries from poor manual handling.
  • Identify and assess potential hazards and choose appropriate methods of risk control which includes the selection of any lifting equipment that may be required.
  • Carry out manual handling techniques in a safe and efficient manner.

Qualification 

Upon successful completion of the course, each successful delegate will receive an in-house certificate, valid for 3 years.

Additional information for delegates

Delegates attending this course should be 18+ and be physically and mentally fit to withstand the rigours of training.

Manual Handling Training Courses - Carehome.co.uk

x

Half Day Manual Handling Course - Book Online | 3B Training

Manual Handling

Health & Safety Courses – Manual Handling

Overview of the Manual Handling Training Course

This course teaches delegates how to improve their manual handling technique, how to conduct a personal risk assessment, and how to understand the risks linked with manual handling.

Course length:
3 hours

Who is it for:
Anyone who conducts manual handling in their occupation. Also useful for individuals who wish to reduce their personal risk when handling.

Course Objectives

When complete, delegates will be able to execute manual handling techniques cautiously and efficiently. They will also be able to analyse a load and lift it correctly. They will gain knowledge on the impact lifting injuries have on a business and regulations and legislation surrounding it.

Course Content

The course is delivered in the classroom and is split into the following five sections:

  • Introduction and Legislation –manual handling is? How injuries are caused. The positive outcome of controlling risks, legislation, employer and employee duties and also HSE guidance.
  • Risk Assessments – what is a risk assessment? Assessing task, load, and environmental hazards. Evaluating who may be harmed. Evaluating risks, recording findings and also reviewing and updating.
  • Reducing and Controlling the Risks – organising a manual handling operation. Hierarchy of control measures, individual capacity and avoiding manual handling. How mechanical aids, changing the task, load and environment, personal protective equipment and reducing the risks from team handling can help in a situation.
  • Techniques – How to lift from low levels, carrying, lowering from a height. Pushing and pulling and team handling.
  • Identifying the Risks – types of injury and the mechanics of movement and factors that increase the risk of harm.

The course makes sure that the employees attending are able to work in line with HSE legislation.

What is Required to Pass the Manual Handling Course?

There is a short assessment at the end of the course.

Entry Requirements

There are no requirements to entry on this course.

Further Development

This course is part of our short course package. The short course days include three, three-hour short courses. You can attend whichever course you would like, and as many as you want during the day. The advantage of the package is that the more you book, the more you save.

This course is also available as an eLearning course, find out more about Manual Handling eLearning here.

Course Locations

Manual Handling training is available in Derby, Hull, Leeds, Liverpool, Manchester, Sheffield, Watford and Wigan.

Contact Us Today

Book your manual handling course online here. If you have any questions or would like to speak to one of the 3B Training specialists, don’t hesitate to get in touch or email us via training@3btraining.com. If you are considering any further training, you can see what courses are available here.

Manual Handling Training Courses In-Person or Online

Manual Handling Training - 

Innovative & effective Manual Handling training from the specialists

Whether you want to train your instructors or your workforce directly, either online or in-person, OFI can help. We specialise in providing customised Manual Handling Training Courses for the UK’s workforce. Our clinical expertise enables us to provide training that goes far beyond the level of training that is offered by generic Health & Safety companies. We have 28 years of experience delivering the highest quality Manual Handling Training to UK organisations, big or small, in all sectors.

Employee training

Our experts train your workforce directly, either on-site at their place of work, or off-site during one of our external courses.

Our on-site Manual Handling courses are customised to your specific working environment & Manual Handling activities.

Instructor training

Our Manual Handling Instructor courses enable your organisation to train highly qualified Manual Handling Instructors, who will be able to carry out your Manual Handling Training in house.

We train several hundred Manual Handling Instructors every year.

Online training

Online Manual Handling Training from the experts at OFI.

An exciting collaboration between our experienced trainers, osteopaths, physiotherapists, and our cutting-edge media & online development team.

Risk assessment

Why not bring in of our expert trainers to carry out Manual Handling Risk Assessments at your site?

Alternatively, book your own Risk Assessors on one of our Manual Handling Risk Assessor Courses, and we will provide training and certification for them.

Definition of 'Manual Handling'

“Manual Handling” is defined as the transporting or supporting of a load (including lifting, putting down, pushing, pulling, carrying or moving) by hand or by bodily force.

The term “Load” is not limited to inanimate objects – it includes people (and animals).

Source: The Manual Handling Operations Regulations 1992 from legislation.gov.uk

Why is Manual Handling training important?

Manual handling injuries can have serious implications for both an employer and the person who has been injured. Employers may have to bear substantial costs, through lost production, sickness absence, overtime & retraining to cover for the absent person, and potentially compensation payments. The injured person may find that their ability to do their job is affected and there may be an impact on their lifestyle, leisure activities, ability to sleep and future job prospects.

Suitable manual handling training is likely to reduce the likelihood of Manual Handling injuries occurring, reduce the frequency that they occur, and reduce their severity.

Who is Manual Handling training for?

Employers have a legal obligation to protect the health and safety of their workforce. This obligation requires an employer to provide their employees with suitable training in relation to the tasks that they are required to undertake.

“Manual Handling” is defined as the transporting or supporting of a load or person (including lifting, putting down, pushing, pulling, carrying or moving) by hand or by bodily force. So by this definition, Manual Handling Training is intended for any person that undertakes such duties as part of their work.

What are the benefits of Manual Handling training with OFI?

At Osteopaths For Industry, we pride ourselves in having some of the very best, highly qualified and most experienced trainers in the business. Our unique selling point is that ALL of our trainers are qualified (and experienced) Osteopaths or Physiotherapists. This provides them with an intricate understanding of the human body and its musculoskeletal systems.

All of our in-house courses can be tailored to meet your exact requirements – we don’t believe in “one-size fits-all” training courses! In addition, you will have priority access to our specialist trainers for advice on any Manual Handling issues that may arise following your training course, and your organisation will have access to our free online training tutorials and videos.

Our Unique Approach

We combine clinical expertise and a long history of working in all sectors of UK industry to provide flexible training services that are revolutionising the health and safety culture in the UK. By focussing on changing cultures within organisations and educating employees in the medical benefits behind using correct manual handling techniques, our training is the most effective tool for reducing injuries available

Our Instructors

All of our Instructors are experienced Osteopaths or Physiotherapists with a vast history of working in all sectors of industry. Our nationwide team of Instructors are experts in the field of injury prevention and are able to explain the ‘Why behind the How’ of using good handling technique, which increases the effectiveness of training.

Meet some of Our Clients

Osteopaths For Industry are trusted by some of the best-known organisations in the UK to provide effective Manual Handling Training and Risk Management advice.

 

 

x

 

x

x

 

Sort by:
Show:
Show:
Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to Basket

#title#

#price#
×
Sale

Unavailable

Sold Out