Manual Handling Training Courses in Worthing, West Sussex

Manual Handling Training Courses in Worthing, West Sussex

Manual handling training is about teaching employees how to safely move heavy items either by lifting, carrying, lowering, pushing or pulling them. Incorrect manual handling is one of the most common causes of injury at work, accounting for over a third of all workplace injuries.

Poor moving and handling practice can lead to back pain and musculoskeletal disorders, as well as the inability to work. It can also lead to moving and handling accidents which can injure and cause discomfort and lack of dignity for the person being moved.

The Mandatory Training Group is the leading UK provider of accredited statutory and mandatory training courses for all sectors, including health and social care, education, local government, private and charity sectors.

We have supported over one million learners to reach their potential through e-learning courses and qualifications using our interactive online learning portal.

Manual Handling Training Courses in Worthing, West Sussex - The Mandatory Training Group UK -

Browse our online manual handling training courses to further your professional development.

LEARN.

Learn anytime, anywhere on any device. Choose from over 500 CPDUK accredited e-learning courses and approved qualifications.

DEVELOP.

Learn new skills in various subjects to improve your personal productivity, career development and employability opportunities.

COMPLY.

Meet the UK and international legislative and regulatory requirements , industry standards and best practice recommendations.

Manual Handling Training Courses in Worthing, West Sussex: FAQs

Online Manual Handling Courses and Training with Certificate - E-Learning Courses - CPDUK Accredited - The Mandatory Training Group UK.

Here at The Mandatory Training Group, we receive many enquiries from all sectors providers relating to Manual Handling Courses and Training. Below, we have listed the most frequently asked questions relating to Manual Handling Courses and Training and provide answers.

Click on the text below to see the answers to the Frequently Asked Questions about Manual Handling Courses and Training.

Manual handling of loads, manual material handling involves the use of the human body to lift, lower, fill, empty, or carry loads. The load can be animate or inanimate. Most manufacturing or distribution systems require some manual handling tasks.

Click here for Manual Handling of Objects - Online Course - CPDUK Accredited.

Manual handling training is a legal requirement in any situation where your staff are required to do any lifting, lowering, pulling or pushing that carries any level risk. Most work environments employ people who incorporate the use of manual handling.

Click here for Manual Handling of Objects - Online Course - CPDUK Accredited.

Save time and complete our Online Manual Handling course (theory only), then arrange your practical assessment. Our online Manual Handling course is a 25 minute course designed to help organisations deliver training to employees as soon as they begin work and before they might need to undertake a manual handling task.

Click here for Manual Handling of Objects - Online Course - CPDUK Accredited.

When carrying out a manual handling risk assessment, it is essential for staff to consider four main areas including the nature of the task, the capabilities of the individual performing it, the characteristics of the load and the layout of the environment. These four factors can be easily remembered by using the acronym TILE.

Under the Manual Handling Regulations, you are legally obliged to ensure all employees are trained and competent in manual handling. Staff should avoid manual handling and, if they can't, you must take steps to reduce the risk of injury.

The majority of companies are required to ensure their employees undertake Manual Handling training. The course should take 2-4 hours depending on the number being trained. Certificates last for 2 years.

The first step in approaching any manual handling task, whether in care or otherwise, is to establish what the risks might be. By moving a person, is there a risk that you might hurt yourself, or that the person could be hurt?

The back is the most vulnerable part of the body when poor technique is used. The lower back is subjected to ten times the weight of the object lifted.

Click here for Moving and Handling People - Online Course - CPDUK Accredited.

Work-related low back pain and injuries are the most common musculoskeletal disorders caused by manual handling. About a fourth of European workers suffer from back pain, which tops the list of all reported work-related disorders.

The Lifting Operation and Lifting Equipment Regulations 1998 (LOLER) place a duty on the employer to ensure equipment and accessories used for lifting people is checked at least every six months by a competent person. This includes hoists and slings. Records must be kept of all thorough examinations and any defects found must be reported to both the person responsible for the equipment and the relevant enforcing authority.

There are general guidelines or maximum weights for men and women. If applying these, no man should attempt to lift anything heavier than 25kg and a woman's maximum limit is 16kg.

Yes, 75% of injuries caused by manual lifting can be prevented. In the food and drinks industry, manual handling and lifting causes 30% of all acute injuries.

Click here for CSTF Moving and Handling People Level 2 - Online Training Course.

Consequences can be split into three main areas, including short term and superficial injuries, long term injuries and mental health issues.

The 5 Ps of safe manual handling are as follows:

  • Plan
  • Position
  • Pick Up
  • Proceed
  • Put down.
  • The following steps outline the process you can follow to reduce the risk of manual handling injuries in your workplace:

  • Step 1: Identify hazardous manual tasks
  • Step 2: Assess the risk
  • Step 3: Implement controls
  • Step 4: Monitor and Review.
  • Manual handling training will help increase employees' awareness of the risks involved with lifting. Further, employees will also recognise that their welfare is top priority, and the course will lead to fewer people taking time off work due to injury.

    For any lifting activity, it is vital to consider the following factors:

  • Individual capability
  • The nature of the load
  • Environmental conditions
  • Training
  • Work organisation.
  • Health and Safety at Work etc Act 1974 (HSWA) is the cornerstone of safe working practices, healthy environments and avoidance of accidents in the workplace, and has sections relevant to manual handling. Management of Health and Safety at Work Regulations 1999 reinforces the 1974 act.

    The Manual Handling Operations Regulations (MHOR) is a piece of health and safety legislation that affects both employers and employees. It passed into law in 1992 and was amended in 2002.

    It is essential to be mindful of the following:

  • Follow the guidance contained within the regulations.
  • Ensure that you have up-to-date and concise risk assessment plans in place for all the manual handling tasks that your employees undertake.
  • Ensure providing adequate and frequent training and refresher training for your employees.
  • If you have manual handling instructors, you must ensure meeting your instructor training and refresher commitments.
  • The Health and Safety Executive (HSE) says risk should be assessed "every time there are new machines, substances and procedures, which could lead to new hazards." An employer should carry out a risk assessment whenever a new job brings in significant new hazards.

    On successful completion of the Online Manual Handling Courses and Training will be able to download, save and/or print a quality assured continuing professional development (CPD) certificate. Our CPD certificates are recognised internationally and can be used to provide evidence for compliance and audit.

    The CPD Certification Service (CPDUK) accredits all of our statutory and mandatory training courses as conforming to universally accepted Continuous Professional Development (CPD) guidelines.

    The Mandatory Training Group is the leading UK provider of accredited health and social care training courses, e-learning programmes and regulated qualifications.

    All our Online Manual Handling Courses and Training are externally peer reviewed and accredited by the CPD Certification Service (CPDUK).

    Click here for more Online Manual Handling Courses and Training

    Manual Handling Training Courses in Worthing, West Sussex - The Mandatory Training Group UK -

    Manual Handling Training Courses in Worthing, West Sussex - E-Learning Courses with Certificates - CPDUK Accredited.

    Just added to your wishlist:
    My Wishlist
    You've just added this product to the cart:
    Go to Basket

    #title#

    #price#
    ×
    Sale

    Unavailable

    Sold Out